<?xml version="1.0" encoding="utf-8" ?>
<?xml-stylesheet type="text/xsl" href="rss.xsl" media="screen"?>
<rss version="2.0">
  <channel>
    <title>百问网 - Linux应用开发</title>
    <link>http://www.100ask.net/showforum-3.aspx</link>
    <description>Latest 20 threads</description>
    <copyright>Copyright (c) 百问网</copyright>
    <generator>Discuz!NT</generator>
    <pubDate>Sun, 01 Aug 2010 05:18:05 GMT</pubDate>
    <ttl>60</ttl>
    <item>
      <title>linux开了Samba，windows却无法打开SMB，为什么</title>
      <description><![CDATA[我的系统是XP的，虚拟机是VMware7.0，linux是RadHat E L 5，我参照国嵌的视频，修改了SMB.conf文件，创建了SMb用户和密码，重启了samba，然后修改了linux的IP，打开xp的运行，输入linux的IP却提示：不能访问网络位置。我修改SMB.conf文件就是加了个改了下里面的参数，其他的都没改。我关掉了SElinux防火墙，结果还是一样，麻烦帮帮我解决下，谢谢。]]></description>
      <link>http://www.100ask.net/showtopic-3077.aspx</link>
      <category>Linux应用开发</category>
      <author>wypwyp</author>
      <pubDate>Fri, 16 Jul 2010 08:53:00 GMT</pubDate>
    </item>
    <item>
      <title>请问大家如何处理开发板和Toolchain 上的GLIBC版本不一致问题</title>
      <description><![CDATA[开发板上的GLIBC 比较老，如果用和开发板一致的Toolchain 去编译要移植的程序，遇到了很多错误。但如果用高版本的Toolchain 去编译移植的程序，编译成功。但把编译好的程序移植到开发板上运行不起来。因为开发板和Toolchain 的GLIBC 不一致。
如果把高版本 Toolchain中的GLIBC 移植到开发板上，会造成Linux不能启动(sbin/init :  kernel ]]></description>
      <link>http://www.100ask.net/showtopic-3061.aspx</link>
      <category>Linux应用开发</category>
      <author>diborvei</author>
      <pubDate>Fri, 02 Jul 2010 14:00:00 GMT</pubDate>
    </item>
    <item>
      <title>嵌入式GUI为什么不用高版本的qt来做啊</title>
      <description><![CDATA[现在都4.5.x了，为什么还要用淘汰的2.2.0阿
直接学qt4可以不阿]]></description>
      <link>http://www.100ask.net/showtopic-2390.aspx</link>
      <category>Linux应用开发</category>
      <author>widon1104</author>
      <pubDate>Wed, 09 Dec 2009 21:02:00 GMT</pubDate>
    </item>
    <item>
      <title>在《S3C2410完全开发流程》遇到的问题</title>
      <description><![CDATA[在做第二个试验例程LED_ON_C出错，编译不通过。
484
我使用的交叉编译器是4.4.3版本。用的是红帽9.0的系统！麻烦大家帮我解决下，谢谢]]></description>
      <link>http://www.100ask.net/showtopic-2519.aspx</link>
      <category>Linux应用开发</category>
      <author>qwe147</author>
      <pubDate>Mon, 04 Jan 2010 20:20:00 GMT</pubDate>
    </item>
    <item>
      <title>关于移植UDA1341时出现错误的问题</title>
      <description><![CDATA[LINUX的内核是2.6.31版本的，按照移植手册上所说的移植后（sound文件夹已用2.6.29的覆盖代替），出现了下面这个错误提示：
sound/core/pcm.c: In function 'snd_pcm_new_stream':
sound/core/pcm.c:670: error: 's......]]></description>
      <link>http://www.100ask.net/showtopic-3049.aspx</link>
      <category>Linux应用开发</category>
      <author>308534826</author>
      <pubDate>Fri, 25 Jun 2010 21:50:00 GMT</pubDate>
    </item>
    <item>
      <title>嵌入式Linux开发完全手册，，书中78页，程序第三行到第五行，看不懂</title>
      <description><![CDATA[嵌入式Linux开发完全手册，，书中78页，程序第三行到第五行，不是很理解。它怎样把GPBCON的【11:10】设置为【01】（GPB5设置为输出了）？？ 5*2不是10么，换成二进制是0000 1010然后再左移一位不是0001 0100么？换成十六进制是0x14，我是这样理解的。 
谢谢啦。]]></description>
      <link>http://www.100ask.net/showtopic-3045.aspx</link>
      <category>Linux应用开发</category>
      <author>jackjingjing</author>
      <pubDate>Fri, 25 Jun 2010 06:26:00 GMT</pubDate>
    </item>
    <item>
      <title>请不要发非技术贴</title>
      <description><![CDATA[请不要发非技术贴]]></description>
      <link>http://www.100ask.net/showtopic-3041.aspx</link>
      <category>Linux应用开发</category>
      <author>thisway.diy</author>
      <pubDate>Wed, 23 Jun 2010 17:52:00 GMT</pubDate>
    </item>
    <item>
      <title>有人在用海思Hi3511的SDK开发产品吗？可以一起讨论问题吗？</title>
      <description><![CDATA[:) 有人在用海思Hi3511的SDK开发产品吗？可以一起讨论问题吗？谢谢！我的msn号码：zy_2004@hotmail.com]]></description>
      <link>http://www.100ask.net/showtopic-2155.aspx</link>
      <category>Linux应用开发</category>
      <author>12345ZY</author>
      <pubDate>Tue, 27 Oct 2009 17:52:00 GMT</pubDate>
    </item>
    <item>
      <title>/work/GUI/qtopia/qtopia-free-2.2.0/qt2/bin/uic：命令未找到</title>
      <description><![CDATA[Generating makefiles................................................................................................................
make: 正在进入目录 `/work/GUI/qtopia/qtopia-free-2.2.0/qtopia'
ma......]]></description>
      <link>http://www.100ask.net/showtopic-2467.aspx</link>
      <category>Linux应用开发</category>
      <author>zyx241</author>
      <pubDate>Thu, 24 Dec 2009 14:20:00 GMT</pubDate>
    </item>
    <item>
      <title>ide驱动移植</title>
      <description><![CDATA[想问一下，嵌入式LINUX应用开发完全手册中IDE驱动这部分有没有测试通过呀？]]></description>
      <link>http://www.100ask.net/showtopic-2936.aspx</link>
      <category>Linux应用开发</category>
      <author>licl2007</author>
      <pubDate>Sat, 15 May 2010 14:16:00 GMT</pubDate>
    </item>
    <item>
      <title>linux内核调试出错！！！</title>
      <description><![CDATA[HOSTCC  scripts/unifdef
scripts/unifdef.c:209: 错误：与‘getline’类型冲突
/usr/include/stdio.h:653: 附注：‘getline’的上一个声明在此
make: ***  错误 1
make: ***  错误 2
make: ***  错误 2
# ls


直接用的光盘上的补丁，给linux打的补丁，然后]]></description>
      <link>http://www.100ask.net/showtopic-2923.aspx</link>
      <category>Linux应用开发</category>
      <author>lwmagic</author>
      <pubDate>Wed, 12 May 2010 21:54:00 GMT</pubDate>
    </item>
    <item>
      <title>[求助]关于make menuconfig</title>
      <description><![CDATA[按照书中 说明
先 make smdk2410_defconfig
(但是 提示找不到 smdk2410_defconfig 只有 s3c2410_defconfig
所以 make s3c2410_defconfig 后
make menuconfig 出错 提示一些 符号未定义 一些文件无法找到 请问 是什么情况
系统是ubuntu 9.10
]]></description>
      <link>http://www.100ask.net/showtopic-2921.aspx</link>
      <category>Linux应用开发</category>
      <author>openhb</author>
      <pubDate>Wed, 12 May 2010 20:48:00 GMT</pubDate>
    </item>
    <item>
      <title>qt-everywhere-4.6.2编译出错不知如何解决，求赐教</title>
      <description><![CDATA[主机系统是Ubuntu，编译器是gcc-3.4.5-glibc-2.3.6

配置qt-for-arm时的命令为./configure -prefix /usr/local/qte-arm -debug-and-release -qt3support -qt-zlib -qt-libtiff -qt-libpng -qt-libmng -qt-libjpeg ......]]></description>
      <link>http://www.100ask.net/showtopic-2896.aspx</link>
      <category>Linux应用开发</category>
      <author>g19890209125</author>
      <pubDate>Sat, 08 May 2010 19:45:00 GMT</pubDate>
    </item>
    <item>
      <title>mini2440下开发CGI程序的问题</title>
      <description><![CDATA[我的开发板用的BOA服务器，
我想用网页控制重启服务器
这是我的程序 reboot.cgi, 用c写的： 
#include &amp;lt;stdlib.h&amp;gt;
#include &amp;quot;cgic.h&amp;quot; 
int cgiMain() 
{
system(&amp;quot;reboot&amp;quot;); 
cgiH......]]></description>
      <link>http://www.100ask.net/showtopic-2882.aspx</link>
      <category>Linux应用开发</category>
      <author>exbob</author>
      <pubDate>Sat, 01 May 2010 17:31:00 GMT</pubDate>
    </item>
    <item>
      <title>steam washing machine</title>
      <description><![CDATA[steam washing machine

阿里路亚&amp;amp;关键字: steam washing machine 油田专用氯化钾 烘干机 细碎机 砂石生产线 制砂机 可曲挠橡胶接头 光缆 高压发泡机 聚氨酯发泡设备 肯德基门 袋式过滤器 tri clamp fittings 吸污车 防静电台垫 带式压滤机 烟雾剂 发热电缆 吸粪车 流动加油车 洒水车价格 高压清洗车 汗蒸房 钢格板 孔明灯]]></description>
      <link>http://www.100ask.net/showtopic-2876.aspx</link>
      <category>Linux应用开发</category>
      <author>ksjdfhbs</author>
      <pubDate>Thu, 29 Apr 2010 14:56:00 GMT</pubDate>
    </item>
    <item>
      <title>我新装的ubuntu 连最简单的程序的 stdio.h 都找不到 怎么回事， 要新添加什么吗  那个添加更新不好弄啊</title>
      <description><![CDATA[我新装的ubuntu 连最简单的程序的 stdio.h 都找不到 怎么回事， 要新添加什么吗  那个添加更新不好弄啊]]></description>
      <link>http://www.100ask.net/showtopic-2845.aspx</link>
      <category>Linux应用开发</category>
      <author>wjh19870407</author>
      <pubDate>Wed, 21 Apr 2010 17:28:00 GMT</pubDate>
    </item>
    <item>
      <title>转让全新友善之臂mini2440</title>
      <description><![CDATA[本人原价500元买的友善之臂mini2440，现以360出售，有意者请联系QQ：447565768  请注明：2440
南京地区可上门验货]]></description>
      <link>http://www.100ask.net/showtopic-2838.aspx</link>
      <category>Linux应用开发</category>
      <author>hdwgq</author>
      <pubDate>Fri, 16 Apr 2010 21:50:00 GMT</pubDate>
    </item>
    <item>
      <title>求助（在连接开发板时）</title>
      <description><![CDATA[# telnet 192.168.1.168
Trying 192.168.1.168...
telnet: connect to address 192.168.1.168: No route to host
开发板的ＩＰ是192.168.1.168，为什么连不起啊]]></description>
      <link>http://www.100ask.net/showtopic-2812.aspx</link>
      <category>Linux应用开发</category>
      <author>yuanlaijiushini</author>
      <pubDate>Thu, 08 Apr 2010 13:00:00 GMT</pubDate>
    </item>
    <item>
      <title>在编译Qtopia时提示cannot find -luuid</title>
      <description><![CDATA[/usr/local/arm/gcc-3.4.5-glibc-2.3.6/arm-linux/bin/../lib/gcc/arm-linux/3.4.5/../../../../arm-linux/bin/ld: skipping incompatible /qtopia/qtopia-free-2.2.0/qtopia/lib/libuuid.so when searching for -lu]]></description>
      <link>http://www.100ask.net/showtopic-2796.aspx</link>
      <category>Linux应用开发</category>
      <author>jxgzoyj</author>
      <pubDate>Fri, 02 Apr 2010 18:35:00 GMT</pubDate>
    </item>
    <item>
      <title>在安装编译QT时提示cannot find -lqte</title>
      <description><![CDATA[arm-linux-g++ -shared -Wl,-soname,libqpe.so.1 -Wl,-rpath,/qtopia/qtopia-free-2.2.0/qtopia/lib -o libqpe.so.1.5.3 .obj/release-shared/qmemoryfile.o .obj/release-shared/calendar.o .obj/release-shared/gl......]]></description>
      <link>http://www.100ask.net/showtopic-2799.aspx</link>
      <category>Linux应用开发</category>
      <author>jxgzoyj</author>
      <pubDate>Sat, 03 Apr 2010 16:32:00 GMT</pubDate>
    </item>
  </channel>
</rss>